The best way to Repair a Fridge Shelf Bracket

Refrigerator shelves can be tempered-glass or wire grills. While under tension from huge load or the help post can snap-off in the slots of the fridge wall refrigerator shelf brackets usually crack. Refrigerator shelves are held in place using a shelf support post, which consists of a peg that fits to the aspect of the fridge. Its a good idea while you fix the shelf bracket to keep your fridge in operating order, to to displace the assistance post.

Shelf Help Post

Remove the shelf.

In the event the bracket is held in place using a white-plastic assistance screw pry off the aged shelf bracket help post using a putty knife. In the event the help post is situated in the middle and doesn’t have a screw that is plastic, grasp it and twist it from the refrigerator. Remove the shelf bracket.

Hold the help post-up to the hole in the ice box sidewall. Align the posts using the holes and press the help post that is screw to the hole.

Tap the best retainer pin of the support post to the ice box sidewall having a hammer. Change the post in its hole 90-degrees clock-wise to snap it set up, in case your support post includes a post in the center as opposed to a retainer pin.

Top Shelf Bracket

Remove the shelf.

Remove the bracket that is old as well as the screws in the shelf.

Snap the bracket on the shelf. Align the screw-holes and push in the screws to to install the bracket.

Door Aspect Bracket

By pulling it forward and up remove the side brackets in the door shelf. Pry them off with a putty knife when they will not come off effortlessly.

Align the pegs of the do-or shelf bracket together with the bracket slots.

Snap the door shelf bracket on to the slots.

See related