Perhaps youâve decided to paint-your region-appear vanity to provide your bedroom decor a lighter, more stylish look. You arrived home with the oak vanity table looking for a little TLC from your fleamarket hunt. Regardless, the piece will be transformed and freshen by painting enamel on the oak-finish of a vanity. Painting over varnish needs a small additional sanding planning. You donât require to entirely eliminate the varnish, but the area should be roughened for the paint to adhere correctly, therefore donât skip this crucial stage.
Place a tarp beneath the the vanity to safeguard carpet or the flooring. Remove all the vanityâs drawers, then remove and reserve the drawer pulls and any other components.
Run water adding a tiny amount of vegetable oil-based cleaner meant for wood. Wring a rag in the water out and clear all surfaces of the vanity. Dry using a soft fabric.
Lightly sand the vanityâs oak area with 220-grit sandpaper to assist the new paint stick. If any components of the wood end are chipped or flaking, sand using a more heavy 100-grit sandpaper first smooth the rough edges with the finer sandpaper away. Wipe away all traces of dirt and grit using a clean, moist cloth.
Mask the mirror, in the event the vanity has one, with blue painterâs tape. Place the tape as near as as possible to the edges of the mirrorâs body. Tuck the tape below the frame, when there’s space between the body as well as the mirror.
Apply a light coat of paint primer to any or all the vanityâs surfaces using a small or medium paint-brush. Use another coat of primer if you’re planning to protect the oak-finish using a white or light colour of enamel. Applying three or two light coats of primer will give outcomes that are better than one large coat. Consult the productâs instructions regarding the sum of drying time required before painting.
Open a can of latex enamel paint and sti-R it completely having a paint stick. Pour a little amount of the paint into a paint t-Ray. Use a clear, dry paint-brush to utilize a gentle coat of the paint. Allow it to dry for a-T least two hrs or as directed on the paint can. Apply a light that is second coat, enabling it to dry. The vanity may need a third or even a mild coat of paint, depending on how nicely the paint how spectacular the change incolor and handles.
Reattach the vanityâs components and slide in the drawers once the paint has carefully dried. Remove the blue painterâs tape in the mirror. If any specks of paint have gotten onto the mirrorâs area, cautiously scrape them a-way using a doubleedged razor blade.