The best way to Figure Out Just How Much Plywood to Use on a Roof

If you are planning to establish a brand new roof or re-build an existing roof, you may want to have an idea of just how much substance you’ll require to protect that roof. You may need to protect your roof if sheathing the roof you can find formulas for approximately estimating the amount of 4-foot by 8-foot sheets of plywood.

Measure width and the length in feet of every roof slope together with the tape measure. A standard gable roof will have similar slopes on each and every side of the ridgeline. Multiply the length by the width to get the square-foot location of one slope. Multiply that figure to get the complete roof area. For instance, in the event the slope length is 40-feet and its own width is 20 feet, 4 multiplied by 20 provides square-feet to 800. Multi-ply 800 by 2 to get an overall total roof area of 1,1,600-square feet since there are two similar slopes.

Divide the total roof area by 32 to get the amount of sheets you may need to protect the roof. A standard 4-foot by 8-foot sheet of plywood covers 32 square feet. In case your roof location is 1, 1, 1,600-square feet,600 divided by 3 2 means that you need about 5-0 sheets to protect the roof. Add 10% to enable waste.

If you can’t calculate the roof straight, or are faced using a gable roof having intersecting wings and other complexities, utilize a method that’ll convert the ground location included in the roof right into a tough estimate of the plywood needed to protect the roof. For instance, in case your house includes a principal region of 2-0 by 40-feet along with a wing that’s 1 5 by 2 toes, multi-ply 2 to get 800 squarefeet for the principal region, and multi-ply 1 5 by 2 to get 300 squarefeet for the wing. Add 300 and 800 to get 100-square toes of complete ground region, 1. Add 2% to that particular figure to permit the roof slope, which outcomes in 1,3-20 square toes of roof region. Divide 1,3-20 by 3-2 to get 4-1 plywood sheets.